NAME

ntp_adjtime, ntp_gettime — Network Time Protocol (NTP) daemon interface system calls

LIBRARY

Standard C Library (libc, -lc)

SYNOPSIS

#include < sys/timex.h>

int
ntp_adjtime( struct timex *);

int
ntp_gettime( struct ntptimeval *);

DESCRIPTION

The two system calls ntp_adjtime() and ntp_gettime() are the kernel interface to the Network Time Protocol (NTP) daemon ntpd(8).

The ntp_adjtime() function is used by the NTP daemon to adjust the system clock to an externally derived time. The time offset and related variables which are set by ntp_adjtime() are used by hardclock() to adjust the phase and frequency of the phase- or frequency-lock loop (PLL resp. FLL) which controls the system clock.

The ntp_gettime() function provides the time, maximum error (sync distance) and estimated error (dispersion) to client user application programs.

In the following, all variables that refer PPS are only relevant if the PPS_SYNC option is enabled in the kernel.

ntp_adjtime() has as argument a struct timex * of the following form:

struct timex { 
 unsigned int modes; /* clock mode bits (wo) */ 
 long offset;  /* time offset (us) (rw) */ 
 long freq;  /* frequency offset (scaled ppm) (rw) */ 
 long maxerror;  /* maximum error (us) (rw) */ 
 long esterror;  /* estimated error (us) (rw) */ 
 int status;  /* clock status bits (rw) */ 
 long constant;  /* pll time constant (rw) */ 
 long precision;  /* clock precision (us) (ro) */ 
 long tolerance;  /* clock frequency tolerance (scaled 
     * ppm) (ro) */ 
 /* 
  * The following read-only structure members are implemented 
  * only if the PPS signal discipline is configured in the 
  * kernel. 
  */ 
 long ppsfreq;  /* pps frequency (scaled ppm) (ro) */ 
 long jitter;  /* pps jitter (us) (ro) */ 
 int shift;  /* interval duration (s) (shift) (ro) */ 
 long stabil;  /* pps stability (scaled ppm) (ro) */ 
 long jitcnt;  /* jitter limit exceeded (ro) */ 
 long calcnt;  /* calibration intervals (ro) */ 
 long errcnt;  /* calibration errors (ro) */ 
 long stbcnt;  /* stability limit exceeded (ro) */ 
};

The members of this struct have the following meanings when used as argument for ntp_adjtime():

modes

Defines what settings should be changed with the current ntp_adjtime() call (write-only). Bitwise OR of the following:

offset

Time offset (in microseconds), used by the PLL/FLL to adjust the system time in small increments (read-write).

freq

Frequency offset (scaled ppm) (read-write).

maxerror

Maximum error (in microseconds). Initialized by an ntp_adjtime() call, and increased by the kernel once each second to reflect the maximum error bound growth (read-write).

esterror

Estimated error (in microseconds). Set and read by ntp_adjtime(), but unused by the kernel (read-write).

status

System clock status bits (read-write). Bitwise OR of the following:

constant

PLL time constant, determines the bandwidth, or “stiffness”, of the PLL (read-write).

precision

Clock precision (in microseconds). In most cases the same as the kernel tick variable (see hz(9)). If a precision clock counter or external time-keeping signal is available, it could be much lower (and depend on the state of the signal) (read-only).

tolerance

Maximum frequency error, or tolerance of the CPU clock oscillator (scaled ppm). Ordinarily a property of the architecture, but could change under the influence of external time-keeping signals (read-only).

ppsfreq

PPS frequency offset produced by the frequency median filter (scaled ppm) (read-only).

jitter

PPS jitter measured by the time median filter in microseconds (read-only).

shift

Logarithm to base 2 of the interval duration in seconds (PPS, read-only).

stabil

PPS stability (scaled ppm); dispersion (wander) measured by the frequency median filter (read-only).

jitcnt

Number of seconds that have been discarded because the jitter measured by the time median filter exceeded the limit MAXTIME (PPS, read-only).

calcnt

Count of calibration intervals (PPS, read-only).

errcnt

Number of calibration intervals that have been discarded because the wander exceeded the limit MAXFREQ or where the calibration interval jitter exceeded two ticks (PPS, read-only).

stbcnt

Number of calibration intervals that have been discarded because the frequency wander exceeded the limit MAXFREQ/4 (PPS, read-only).

After the ntp_adjtime() call, the struct timex * structure contains the current values of the corresponding variables.

ntp_gettime() has as argument a struct ntptimeval * with the following members:

struct ntptimeval { 
 struct timeval time; /* current time (ro) */ 
 long maxerror;  /* maximum error (us) (ro) */ 
 long esterror;  /* estimated error (us) (ro) */ 
};

These have the following meaning:

RETURN VALUES

ntp_adjtime() and ntp_gettime() return the current state of the clock on success, or any of the errors of copyin(9) and copyout(9). ntp_adjtime() may additionally return EPERM if the user calling ntp_adjtime() does not have sufficient permissions.

Possible states of the clock are:

ERRORS

The ntp_adjtime() system call may return EPERM if the caller does not have sufficient permissions.

BUGS

Take note that this API is extremely complex and stateful. Users should not attempt modification without first reviewing the ntpd(8) sources in depth.

YOS OPENSONAR