NAME

SYNOPSIS

void
mtx_init( struct mtx *mutex, const char *name, const char *type, int opts);

void
mtx_destroy( struct mtx *mutex);

void
mtx_lock( struct mtx *mutex);

void
mtx_lock_spin( struct mtx *mutex);

void
mtx_lock_flags( struct mtx *mutex, int flags);

void
mtx_lock_spin_flags( struct mtx *mutex, int flags);

int
mtx_trylock( struct mtx *mutex);

int
mtx_trylock_flags( struct mtx *mutex, int flags);

void
mtx_unlock( struct mtx *mutex);

void
mtx_unlock_spin( struct mtx *mutex);

void
mtx_unlock_flags( struct mtx *mutex, int flags);

void
mtx_unlock_spin_flags( struct mtx *mutex, int flags);

int
mtx_sleep( void *chan, struct mtx *mtx, int priority, const char *wmesg, int timo);

int
mtx_initialized( const struct mtx *mutex);

int
mtx_owned( const struct mtx *mutex);

int
mtx_recursed( const struct mtx *mutex);

options INVARIANTS
options INVARIANT_SUPPORT
void
mtx_assert( const struct mtx *mutex, int what);

#include < sys/kernel.h>

MTX_SYSINIT( name, struct mtx *mtx, const char *description, int opts);

DESCRIPTION

1. Acquiring and releasing uncontested mutexes should be as cheap as possible.
2. They must have the information and storage space to support priority propagation.
3. A thread must be able to recursively acquire a mutex, provided that the mutex is initialized to support recursion.

There are currently two flavors of mutexes, those that context switch when they block and those that do not.

By default, MTX_DEF mutexes will context switch when they are already held. As an optimization, they may spin for some amount of time before context switching. It is important to remember that since a thread may be preempted at any time, the possible context switch introduced by acquiring a mutex is guaranteed to not break anything that is not already broken.

Mutexes which do not context switch are MTX_SPIN mutexes. These should only be used to protect data shared with primary interrupt code. This includes interrupt filters and low level scheduling code. In all architectures both acquiring and releasing of a uncontested spin mutex is more expensive than the same operation on a non-spin mutex. In order to protect an interrupt service routine from blocking against itself all interrupts are either blocked or deferred on a processor while holding a spin lock. It is permissible to hold multiple spin mutexes.

Once a spin mutex has been acquired it is not permissible to acquire a blocking mutex.

The storage needed to implement a mutex is provided by a struct mtx. In general this should be treated as an opaque object and referenced only with the mutex primitives.

The mtx_init() function must be used to initialize a mutex before it can be passed to any of the other mutex functions. The name option is used to identify the lock in debugging output etc. The type option is used by the witness code to classify a mutex when doing checks of lock ordering. If type is NULL, name is used in its place. The pointer passed in as name and type is saved rather than the data it points to. The data pointed to must remain stable until the mutex is destroyed. The opts argument is used to set the type of mutex. It may contain either MTX_DEF or MTX_SPIN but not both. See below for additional initialization options. It is not permissible to pass the same mutex to mtx_init() multiple times without intervening calls to mtx_destroy().

The mtx_lock() function acquires a MTX_DEF mutual exclusion lock on behalf of the currently running kernel thread. If another kernel thread is holding the mutex, the caller will be disconnected from the CPU until the mutex is available (i.e., it will block).

The mtx_lock_spin() function acquires a MTX_SPIN mutual exclusion lock on behalf of the currently running kernel thread. If another kernel thread is holding the mutex, the caller will spin until the mutex becomes available. Interrupts are disabled during the spin and remain disabled following the acquiring of the lock.

It is possible for the same thread to recursively acquire a mutex with no ill effects, provided that the MTX_RECURSE bit was passed to mtx_init() during the initialization of the mutex.

The mtx_lock_flags() and mtx_lock_spin_flags() functions acquire a MTX_DEF or MTX_SPIN lock, respectively, and also accept a flags argument. In both cases, the only flags presently available for lock acquires are MTX_QUIET and MTX_RECURSE. If the MTX_QUIET bit is turned on in the flags argument, then if KTR_LOCK tracing is being done, it will be silenced during the lock acquire. If the MTX_RECURSE bit is turned on in the flags argument, then the mutex can be acquired recursively.

The mtx_trylock() attempts to acquire the MTX_DEF mutex pointed to by mutex. If the mutex cannot be immediately acquired mtx_trylock() will return 0, otherwise the mutex will be acquired and a non-zero value will be returned.

The mtx_trylock_flags() function has the same behavior as mtx_trylock() but should be used when the caller desires to pass in a flags value. Presently, the only valid value in the mtx_trylock() case is MTX_QUIET, and its effects are identical to those described for mtx_lock() above.

The mtx_unlock() function releases a MTX_DEF mutual exclusion lock. The current thread may be preempted if a higher priority thread is waiting for the mutex.

The mtx_unlock_spin() function releases a MTX_SPIN mutual exclusion lock.

The mtx_unlock_flags() and mtx_unlock_spin_flags() functions behave in exactly the same way as do the standard mutex unlock routines above, while also allowing a flags argument which may specify MTX_QUIET. The behavior of MTX_QUIET is identical to its behavior in the mutex lock routines.

The mtx_destroy() function is used to destroy mutex so the data associated with it may be freed or otherwise overwritten. Any mutex which is destroyed must previously have been initialized with mtx_init(). It is permissible to have a single hold count on a mutex when it is destroyed. It is not permissible to hold the mutex recursively, or have another thread blocked on the mutex when it is destroyed.

The mtx_sleep() function is used to atomically release mtx while waiting for an event. For more details on the parameters to this function, see sleep(9).

The mtx_initialized() function returns non-zero if mutex has been initialized and zero otherwise.

The mtx_owned() function returns non-zero if the current thread holds mutex. If the current thread does not hold mutex zero is returned.

The mtx_recursed() function returns non-zero if the mutex is recursed. This check should only be made if the running thread already owns mutex.

The mtx_assert() function allows assertions specified in what to be made about mutex. If the assertions are not true and the kernel is compiled with options INVARIANTS and options INVARIANT_SUPPORT, the kernel will panic. Currently the following assertions are supported:

MA_OWNED

Assert that the current thread holds the mutex pointed to by the first argument.

MA_NOTOWNED

Assert that the current thread does not hold the mutex pointed to by the first argument.

MA_RECURSED

Assert that the current thread has recursed on the mutex pointed to by the first argument. This assertion is only valid in conjunction with MA_OWNED.

MA_NOTRECURSED

Assert that the current thread has not recursed on the mutex pointed to by the first argument. This assertion is only valid in conjunction with MA_OWNED.

The MTX_SYSINIT() macro is used to generate a call to the mtx_sysinit() routine at system startup in order to initialize a given mutex lock. The parameters are the same as mtx_init() but with an additional argument, name, that is used in generating unique variable names for the related structures associated with the lock and the sysinit routine.

SEE ALSO

HISTORY