|TFTP-PROXY(8)||FreeBSD System Manager's Manual||TFTP-PROXY(8)|
NAMEtftp-proxy — Internet Trivial File Transfer Protocol proxy
|tftp-proxy||[ -v][ -w transwait]|
DESCRIPTIONtftp-proxy is a proxy for the Internet Trivial File Transfer Protocol invoked by the inetd(8) internet server. TFTP connections should be redirected to the proxy using the pf(4) rdr command, after which the proxy connects to the server on behalf of the client.
The proxy establishes a pf(4) rdr rule using the anchor facility to rewrite packets between the client and the server. Once the rule is established, tftp-proxy forwards the initial request from the client to the server to begin the transfer. After transwait seconds, the pf(4) NAT state is assumed to have been established and the rdr rule is deleted and the program exits. Once the transfer between the client and the server is completed, the NAT state will naturally expire.
Assuming the TFTP command request is from $client to $server, the proxy connected to the server using the $proxy source address, and $port is negotiated, tftp-proxy adds the following rule to the anchor:
rdr proto udp from $server to $proxy port $port -> $client
The options are as follows:
CONFIGURATIONTo make use of the proxy, pf.conf(5) needs the following rules. The anchors are mandatory. Adjust the rules as needed for your configuration.
In the NAT section:
nat on $ext_if from $int_if -> ($ext_if:0) no nat on $ext_if to port tftp rdr-anchor "tftp-proxy/*" rdr on $int_if proto udp from $lan to any port tftp ->\ 127.0.0.1 port 6969
In the filter section, an anchor must be added to hold the pass rules:
127.0.0.1:6969 dgram udp wait root \ /usr/libexec/tftp-proxy tftp-proxy
CAVEATStftp-proxy chroots to /var/empty and changes to user “proxy” to drop privileges.
|November 28, 2005||FreeBSD|