TRM(4) | FreeBSD Kernel Interfaces Manual | TRM(4) |
NAME
trm — Tekram TRM-S1040 ASIC based PCI SCSI host adapter driverSYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device scbus
device trm
device trm
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
trm_load="YES"
DESCRIPTION
The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.HARDWARE
SCSI controllers supported by the trm driver include:
- Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
- Tekram DC-315U PCI Ultra SCSI adapter without BIOS
- Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
- Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
- Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
- Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS
For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.
AUTHORS
The trm driver was originally written for FreeBSD 3.0/i386 by of Tekram Technology, and ported to FreeBSD 5.0 by <cognet@FreeBSD.org>.December 8, 2002 | FreeBSD |