SNMP_ATM(3) | FreeBSD Library Functions Manual | SNMP_ATM(3) |
NAME
atmif_event_f, atm_find_if_name, atm_find_if, atm_notify_aif, atm_unnotify_aif — ATM driver module for snmpd.LIBRARY
(begemotSnmpdModulePath."netgraph" = /usr/lib/snmp_netgraph.so (FreeBSD)) (begemotSnmpdModulePath."mibII" = /usr/lib/snmp_mibII.so) (begemotSnmpdModulePath."atm" = /usr/lib/snmp_atm.so)SYNOPSIS
#include < bsnmp/snmpmod.h>#include < bsnmp/snmp_mibII.h>
#include < bsnmp/snmp_atm.h>
typedef void
(*atmif_event_f)( struct atmif *aif, enum atmif_notify event, uintptr_t data, void *uarg);
struct atmif *
atm_find_if_name( const char *name);
struct atmif *
atm_find_if( u_int ifindex);
void *
atm_notify_aif( struct atmif *aif, const struct lmodule *mod, atmif_event_f func, void *uarg);
void
atm_unnotify_aif( void *not);
DESCRIPTION
The snmp_atm module implements a number of tables and scalars that enable remote access to the ATM devices in the system. It also exports a number of functions, that allow other modules to easily access ATM devices.The module maintains an extension to the interface structure exported by snmp_mibII(3) for all ATM devices. This structure has the following fields:
struct atmif { struct mibif *ifp; /* common interface data */ struct atmif_mib *mib; /* ATM MIB */ enum atmif_carrier_state carrier; enum atmif_suni_mode mode; /* SUNI mode SDH or SONET */ };
The fields have the following meaning:
- ifp
- The field points to the snmp_mibII(3) interface structure.
- mib
- The special ATM interface MIB (see below).
- carrier
-
The current state of the carrier. One of the following:
- ATMIF_CARRIER_ON
- carrier detected,
- ATMIF_CARRIER_OFF
- no carrier,
- ATMIF_CARRIER_UNKNOWN
- the state of the carrier is unknown,
- ATMIF_CARRIER_NONE
- the device has no notion of carrier or is not able to sense it.
- mode
-
For ATM devices with a SUNI chip this is the current mode of the interface:
- ATMIF_SUNI_MODE_SONET
- The interface is in SONET mode.
- ATMIF_SUNI_MODE_SDH
- The interface is in SDH mode.
- ATMIF_SUNI_MODE_UNKNOWN
- The interface either has no SUNI interface or the mode is unknown (for example, interface is down).
An ATM interface can be found by name or by SNMP interface index (see snmp_mibII(3) for a discussion of interface indexes). The function atm_find_if_name() searches an interface given a name. The function atm_find_if() searches an interface by its interface index. Both functions return NULL if an interface cannot be found.
The ATM MIB contains the following fields:
struct atmif_mib { u_int version; /* currently 0 */ u_int device; /* type of hardware (system specific) */ u_int serial; /* card serial number (device specific) */ u_int hw_version; /* card version (device specific) */ u_int sw_version; /* firmware version (device specific) */ u_int media; /* physical media (see MIB) */ u_char esi[6]; /* end system identifier (MAC) */ u_int pcr; /* supported peak cell rate */ u_int vpi_bits; /* number of used bits in VPI field */ u_int vci_bits; /* number of used bits in VCI field */ u_int max_vpcs; /* maximum number of VPCs */ u_int max_vccs; /* maximum number of VCCs */ };
NOTIFICATIONS
An other module can register with atmif_event_f to receive notifications when certain events happen on the ATM interface. The registration is done with atm_notify_aif() which takes a pointer to the interface, the calling module pointer, a callback function and a user argument that is passed to the callback function. The callback function is called with the interface pointer, a notification code, a notification argument and the user argument. The following notifications are defined:- ATMIF_NOTIFY_DESTROY
- The interface is destroyed. The notification argument is not used.
- ATMIF_NOTIFY_CARRIER
- The carrier state on the interface has changed. The argument is the old state of the carrier. The new state can be obtained from the interface structure.
- ATMIF_NOTIFY_VCC
-
A permanent VCC has been created or destroyed. The argument is an u_int that can be decoded as follows:
vpi = (arg >> 24) & 0xff; vci = (arg >> 8) & 0xffff; state = arg & 1;
state is 0 if the VCC was destroyed and 1 if it was created.
MIB
The MIB implemented by the module is defined in BEGEMOT-ATM.txt. In the generic part there are two tables and one scalar, there is also a system specific group:- begemotAtmIfTable
- This table is an extension of ifTable. It contains a row for each ATM interface and is index with ifIndex. All fields are read-only except the begemotAtmIfMode column.
- begemotAtmIfTableLastChange
- Contains the tick when a row was created or destroyed in the above table or 0, if the table did not change since start of the SNMP agent.
- begemotAtmHWTable
- Is also indexed by ifIndex and contains hardware specific information. This table is read-only.
FILES
- /usr/share/snmp/defs/atm_tree.def
- The description of the MIB tree implemented by atmif_event_f.
- /usr/share/snmp/mibs/BEGEMOT-ATM.txt
- This is the MIB that is implemented by this module.
AUTHORS
<harti@FreeBSD.org>May 23, 2005 | FreeBSD |